DROK PWM DC Motor Driver Controller, DC 10-50V 12V 24V 36V 48V Motor Control Module 40A 2000W with PLC Forward Reverse Regulator Switch Protective Case
DROK PWM DC Motor Driver Controller, DC 10-50V 12V 24V 36V 48V Motor Control Module 40A 2000W with PLC Forward Reverse Regulator Switch Protective Case by DROK at tradingmart.net. MPN: 2001711001. Hurry! Limited time offer. Offer valid only while supplies last. Parameters: Input voltage range: DC 10-50V Output voltage: linear (with load) Output limit current: 40A (long time use 20A, pay attention to heat dissipation) Limit power: 2000W Speed regulation type: flow control Speed regulation mode: potentiometer (linear) Speed duty cycle range: 0--100% Control frequency: 25KHZ Wiring type: barrier terminals Knob line length: 20CM Potentiometer installed hole: 7MM Note: Make sure the positive and negative connections are correct before the power is on.
Product Description & Reviews
Parameters: Input voltage range: DC 10-50V Output voltage: linear (with load) Output limit current: 40A (long time use 20A, pay attention to heat dissipation) Limit power: 2000W Speed regulation type: flow control Speed regulation mode: potentiometer (linear) Speed duty cycle range: 0--100% Control frequency: 25KHZ Wiring type: barrier terminals Knob line length: 20CM Potentiometer installed hole: 7MM Note: Make sure the positive and negative connections are correct before the power is on. Do not touch the heatsink or the circuit board may be burnt. Note that this is not a power module, you must connect to the motor then you can regulate speed. Cannot connect to the AC power. Package Including: 1x PWM Motor Controller
Features & Highlights
- DROK PWM motor controller input voltage range is DC10-50V, output limit current is 40A, limit power is 2000W, speed regulation duty cycle range is 0-100%, control frequency is 25kHz.
- Speed Regulation: speed regulation type is flow control, you can regulate the speed through the potentiometer knob.
- Switch: the motor driver control module is designed with forward and reverse rotation control switch, and potentiometer knob with switch, which can use PLC control the forward and reverse rotation.
- Note: please make sure the positive and negative connections are correct before the power is on. Do not touch the heatsink or the circuit board may be burnt. Note that this is not a power module, please connect to the motor then you can regulate speed. Cannot connect to the AC power.
- Protective Case: it is designed with an aluminum case to protect the module from damaging.
Additional Information
| Manufacturer: | DROK |
| Brand: | DROK |
| Part Number: | 2001711001 |
| Publisher: | DROK |
| Studio: | DROK |
| MPN: | 2001711001 |
| Package Weight: | 0.6 pounds |
| Package Size: | 5.39 x 1.85 x 1.85 inches |
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by DROK, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By uniquegoods
mpn: 43237-2,
DC 10-60V 12V 24V 36V 48V MAX 20A DC Motor Speed Control PWM HHO Driver RC Controller Speed Regulator Stepless Variable Rotary Switches Parameters: Motor Type: DC Motor Model Number: CCM96SK Item Name: PWM DC Motor Control Size: 88mm*59mm*35mm Input supply voltage: DC 10V-60V Output Voltage:0-100% Output power: 12V*10A=120W,24*10A=240W,36V*10A=360W,48V*10A=480W Maximum continuous output current: 10A Peak current: 20A Duty Cycle adjustable: 5%-100% PWM frequency: 25kHz Before you
By Century Electric Motors
mpn: C01575, ean: 0663001058694,
Fan kit is designed to replace most repair projects. 9/16 inch Coil stack, Continuous duty, Air Over. Kit contains Motor, 1 fan = 4.5 (flat/paddle style). Will replace most motors in Nutone, Fasco, Broan, Dayton and many other units..65 amps, 3000RPM, 115 volts 60hz. Motor is mechanically reversible - Shipped CCW Shaft End. Shaft =0.181 x 1 1/2 inch - with flat, wire length = 6'' with 2-prong plug. Mounting studs 1 7/8'' on center. Fan kit is designed to replace most repair projects. 9/16 Coil
By Broan
mpn: 99080180, ean: 0663001041030,
Replacement vent motor, motor is mechanically reversible, Fan kit is designed to replace most repair projects. 5/8 coil stack, continuous duty, air over. Kit contains motor.Continuous duty. Kit contains motor. Motor is mechanically reversible.
By uniquegoods
mpn: CCM5D, ean: 0605145000665,
Features: CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions. The display range of 3-digit LED display is ''000''-''100''. (For example, displayed ''066'' as the picture 1, it means that the PWM output duty cycle is 66%.) Adjustable speed range is 0%-100%. Suitable for the DC motor (or DC load) within 5A, Peak current 8A. Incorporate a push key.
By uxcell
mpn: a17011200ux0077,
Description:This is a CCW (counter clockwise) rotation pellet stove gear motor assembly. The auger motor has wire leads for electrical connection with plugged in directly, no matter which wire connects to which lead. Cross Reference:Fasco V003, Fasco V08038AA09, National Steel Crafters 6807, Lennox Hearth 6216, 4515U1-063, Whitfield Quest, 93-0194, 12046300, ECM-6, V07524ACD9, Traditions Profile series stoves, Avalon, Austroflamm Breckwell, Merkle-Korff, Earth stove, Envirofire, Lopi, Pellet
By RioRand
mpn: RR-MJLK-FBDG, ean: 0637012215377,
Brand: RioRand Product Specifications: Applicable voltage range: DC 7-80V (80V is the maximum operating voltage please leave margin while using) Drive current: maximum 30A(Current need to reduce relatively while working voltage is high) Control power: 12V within 300W ; 24V within 400W ; 48V within 450W ; 72V within 500W Duty cycle adjustable range: about 1% -100% PWM frequency: 12KHZ Note: This product is DC brush motor speed controller, can not access AC power and drive brushless motor.If
By ILS
mpn: 1167072, ean: 0658515691437,
ILS - 3 pieces NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator Stepper Motor Driver.
By Hallmark Industries
mpn: MA0503E,
AC motor, 1/3Hp, 1725Rpm, 3pH/60Hz, 208-230/460VAC, 56C/TEFC, with foot, sf 1.15, Insul F, inverter duty, UL listed, UL File no.: E233961Hallmark Industries ac motor,. 1/3Hp, 1725 rpm, 3Ph/60 hz, 208-230/460Vac,. 56C/tefc, with foot, sf 1.15, insul f, inverter duty.